Quick answer
Almost every SDS you receive follows the UN GHS: 16 sections in a fixed order, a date of issue and a version, and hazard pictograms, H and P statements that match the label. The GHS is binding only through national law and each country adopts its own revision, so check that every SDS was made for the revision your country requires, for example Rev.7 in the United States, Canada and Australia. The latest edition is GHS Rev.11, published by UNECE in September 2025.
What it is
The GHS is one worldwide set of criteria for classifying chemicals by their physical, health and environmental hazards. It defines hazard classes and categories, pictograms, signal words, hazard statements (H codes), precautionary statements (P codes) and the 16 section safety data sheet. It becomes law only when a country or region writes it into its own legislation. Countries may adopt only some hazard classes and categories (the “building block approach”) and different revisions, so the same product can need different SDS in different markets. The GHS is published in English, French and Spanish.
Does it apply to you?
- You buy, store or use chemicals: the SDS and labels you receive follow the GHS revision of your country.
- You also place chemical products on the market: the national law that implements the GHS sets your classification, label and SDS duties.
- You sell in several markets: each market may require a different GHS revision, for example Rev.7 in Australia, Canada and the United States.
Managing your safety data sheets
The GHS is a UN recommendation. The SDS rules bind you and your suppliers only through national law: in the EU through REACH article 31 and Annex II, in the US through the Hazard Communication Standard. For a company that receives SDS, the GHS gives a practical checklist.
| Task | What applies |
|---|---|
| Collect SDS from suppliers | Expect an SDS for every substance or mixture that meets the GHS hazard criteria, and for mixtures with an ingredient above the generic cut off values (1.5.3.1). Authorities may require SDS below these levels. |
| Check the format | Sixteen headings in a fixed order, from 1 Identification to 16 Other information (1.5.3.2.1 and Annex 4). Every heading has information, or says it does not apply or is not available (1.5.3.3). |
| Check language and version | Every SDS shows its date of issue and a version or revision indication (A4.2.2.4). The language is set by national law. Check that the SDS was made for the GHS revision your country requires. |
| Check local data | Section 8 should list the exposure limits of the country where the SDS is used, and section 15 its regulatory information (1.5.3.3.2, A4.3.8.1). |
| Keep SDS current | Compare dates and versions and replace old SDS when your supplier sends a new one. Retention is set by national law, not by the GHS. |
| Give workers access | Set by national workplace law; workers are trained on labels and SDS. |
| Keep a chemical register | Not set by the GHS; link each SDS to the product in your chemical inventory. |
| What the auditor asks | There is no GHS audit as such. Auditors and inspectors check through national law that every hazardous product has a correct SDS, in the format and revision required where it is used, linked to the chemical inventory. |
What you need to do
- Get an SDS for every substance or mixture you use that meets the GHS hazard criteria.
- Check that each SDS has the 16 headings in the fixed order.
- Check that the SDS states its issue date and version.
- Check that pictograms, signal word, H and P statements in section 2 match the label.
- Check that each SDS was prepared under the GHS revision your country requires.
- Check that section 8 lists the exposure limits of the country where the SDS is used.
- Check that section 15 gives the national regulatory information of that country.
- Use section 14 transport data (UN number, class, packing group) for storage and transport.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| SDS available | Product library | Which hazardous products have no SDS |
| 16 section structure | All sections | Whether sections are missing or out of order |
| SDS current and versioned | Issue date and version | Whether the SDS is outdated |
| Classification and label elements | Section 2 (H and P codes, pictograms, signal word) | The hazards of each product and whether the codes are valid in your jurisdiction |
| Revision for the market | Sections 2 and 9 | Whether the SDS was made for another market or an outdated revision |
| National exposure limits | Sections 3 and 8 | Whether section 8 matches the limits of your country |
| Transport data | Section 14 | UN number, shipping name, class and packing group |
Key lists and limits
- No substance list. The GHS does not list classified substances and sets no exposure limits. Harmonised classification lists are national or regional, for example EU CLP Annex VI: see Belgium, the Netherlands and the United States.
- SDS cut off values. A mixture needs an SDS when it contains an ingredient above a generic cut off, for example 0.1 percent for carcinogens, reproductive toxicants, sensitisers and category 1 mutagens, and 1 percent for most other health and environmental classes.
- Code lists. Annex 3 lists all hazard statements, precautionary statements and pictograms (GHS01 to GHS09). There are nine pictograms. It is published only as PDF on the UNECE Rev.11 page.
- SDS format. The 16 section SDS is also described in ISO 11014.
Key dates
- 14 December 2025: Canada’s transition to Rev.7 with parts of Rev.8 ended.
- September 2025: Rev.11 published by UNECE.
- 19 July 2024: updated US Hazard Communication Standard (Rev.7) takes effect.
- 1 January 2023: Rev.7 mandatory in Australia (Western Australia from 31 March 2023).
- 15 December 2022: Canada applies Rev.7 with parts of Rev.8.
Frequently asked questions
What is the latest GHS revision?
Rev.11, the eleventh revised edition (ST/SG/AC.10/30/Rev.11), published by UNECE in September 2025. A new revision follows every two years.
Is the GHS legally binding?
Not by itself. It becomes binding only when a country or region writes it into its own law, for example the EU CLP Regulation or the US Hazard Communication Standard.
Which GHS revision do the US and the EU use?
The US uses Rev.7: the updated OSHA Hazard Communication Standard took effect on 19 July 2024. EU CLP was last aligned with Rev.6 and Rev.7 through its 12th adaptation (Regulation (EU) 2019/521), and the EU also has hazard classes that are not in the GHS, such as endocrine disruption.
What are the 16 sections of a GHS safety data sheet?
1 Identification, 2 Hazard identification, 3 Composition, 4 First aid, 5 Fire fighting, 6 Accidental release, 7 Handling and storage, 8 Exposure controls and personal protection, 9 Physical and chemical properties, 10 Stability and reactivity, 11 Toxicological information, 12 Ecological information, 13 Disposal, 14 Transport, 15 Regulatory information and 16 Other information.
Should I get an SDS for a mixture?
Yes, when it meets the hazard criteria, or when it contains an ingredient above the generic cut off: for example 0.1 percent for carcinogens, reproductive toxicants, sensitisers and category 1 mutagens, and 1 percent for most other health and environmental classes.
How do I know if an SDS is the latest version?
Annex 4 asks for a date of issue and a version or revision indication on every SDS. Compare them with the version you hold and ask your supplier for the newest edition.
Which exposure limits should section 8 of my SDS show?
Those of the country or region where the SDS is supplied, with their notations and source (A4.3.8.1). The GHS itself sets no exposure limits.
What is the GHS building block approach?
Countries may adopt only some hazard classes and categories. Whatever they adopt should follow the GHS criteria, but the same product can still need a different SDS in each market.
Related frameworks
- ISO 11014: the ISO standard for the same 16 section SDS.
- ISO 45001: uses GHS hazard data from the SDS in the chemical risk assessment.
- United States: implements Rev.7 through the Hazard Communication Standard.
- Belgium: applies the GHS through EU CLP, with national SDS language rules.
- Netherlands: applies the GHS through EU CLP.
Official sources
- UNECE: About the GHS
- UNECE: GHS Rev.11 (2025), free PDF
- UN GHS Rev.10 (2023), UN Office at Geneva
- OSHA Hazard Communication rulemaking
- Health Canada: amended Hazardous Products Regulations
- Safe Work Australia: transition to GHS 7
- Swiss notification authority: ATPs in the CLP Regulation
Based on research of 16 November 2026. This page is not legal advice; always check the official text.