Product registration

NSF Nonfood Compounds Registration Program

How food plants check NSF H1, A1 and D2 claims on their SDS: White Book listing, label marks and the NSF letter kept with each safety data sheet.

Reviewed 16 November 2026

Quick answer

Many SDS state an NSF registration in section 15, such as H1 for lubricants or A1 for cleaners, but the claim only holds when the product is listed in the NSF White Book and the NSF mark, category code and six digit number are on the label. Food plants keep the NSF letter next to each SDS and verify it in the White Book. H1 means a lubricant is acceptable where incidental food contact is possible; NSF checks the full formulation against US FDA rules, mainly 21 CFR 178.3570.

What it is

A chemical supplier sends NSF the full formulation, the label and the SDS. An NSF toxicologist checks that every ingredient is acceptable for the intended use, mostly against US FDA food additive rules in 21 CFR, and that the label gives correct directions. If it passes, NSF issues a registration letter with a six digit number and a category code, and lists the product in the public White Book. Registration is complete only when the NSF mark, the category code and the number are on the label and the product is listed. The scheme replaced the former USDA approval of compounds for meat and poultry plants. For lubricants, ISO 21469 is a separate certification with facility audits.

Does it apply to you?

  • You make or distribute cleaners, sanitisers, lubricants, boiler or water treatment chemicals and sell them to food or beverage plants.
  • Your food industry customers are certified to BRCGS, IFS Food or FSSC 22000: their auditors usually accept NSF H1, A1 or D2 as proof that a chemical is suitable for a food plant.
  • You run a food plant and use lubricants where incidental product contact is possible, or cleaners and sanitisers on food contact surfaces.

Managing your safety data sheets

Task What applies
Collect SDS and NSF letters Get the SDS and the NSF registration letter for every lubricant, cleaner and sanitiser used in food areas. NSF itself asks for the SDS with every registration; the SDS duty comes from chemical law (REACH article 31 and Annex II in the EU).
Verify the NSF claim Check the registration number stated in SDS section 15 against the White Book, and the NSF mark, category code and number on the label.
Check names Product and company names must match the White Book entry; rebranded products sold by distributors need a distributor subregistration.
Keep SDS and registration current NSF letters carry no expiry date, but a change of formulation or label needs a new NSF review. When a revised SDS shows a changed section 3, ask the supplier to confirm the registration still applies.
Keep an approved chemicals list Food safety auditors expect a site list of approved chemicals with SDS, technical data sheet and food grade evidence.
Keep worker safety checks NSF status does not replace CLP classification. Keep the SDS in the local language and use it in the risk assessment.
What the auditor asks An NSF H1 letter or ISO 21469 certificate for each lubricant where product contact is possible, NSF A1 or D2 for cleaners and sanitisers on food contact surfaces, and the matching White Book entries.

What you need to do

  1. Check which of your products are used in food plants and which NSF category fits each use.
  2. Submit the full formulation, label and SDS to NSF for each product you want registered.
  3. Print the NSF Registered mark, the category code and the registration number on the label.
  4. Register rebranded products sold by distributors as distributor subregistrations.
  5. Get a new NSF review before changing a registered formulation or label.
  6. Check each lubricant formulation against the permitted substances and limits of 21 CFR 178.3570.
  7. Keep the EPA registration for antimicrobial and pesticide products where the category asks for it.
  8. As a food plant, keep the NSF letter for each product and verify it in the White Book.
  9. As a food plant, use H1, HT1 or ISO 21469 lubricants wherever product contact is possible.
  10. Remember that NSF status does not replace CLP classification or worker safety checks.

What NextSDS checks for you

Check SDS data used What it tells you
H1 lubricant ingredients Section 3 (CAS numbers) Whether listed ingredients appear in 21 CFR 178.3570 and with which limit
Name and supplier match Sections 1.1 and 1.3 Whether product and company match the NSF letter and White Book entry
Use matches the NSF category Section 1.2 Whether the stated use fits the registered category, for example a no rinse sanitiser
Declared NSF registration Section 15 The NSF registration number or ISO 21469 claim stated by the supplier, ready to verify
Worker safety Sections 2 and 8 The CLP hazards that still apply to a food grade product
Formulation changes Sections 3 and 16 Which SDS revisions may need a new NSF review

Key lists and limits

  • 21 CFR 178.3570, lubricants with incidental food contact: the US list of 46 substances allowed in H1 lubricants beyond GRAS and prior sanctioned substances, each with a limit such as a percentage of the lubricant or a maximum addition to food in parts per million. eCFR
  • Other 21 CFR sections behind NSF categories: 178.1010 sanitizing solutions (D2), 173.310 boiler water additives (G6) and 173.315 fruit and vegetable washing (3D).
  • NSF category codes: for example A1 general cleaners, D1 and D2 antimicrobials with and without rinse, G6 boiler treatment with food contact, H1 lubricants with incidental contact, H2 lubricants with no contact, HT1 heat transfer fluids, and the programmes 537 PFAS free and 538 MOAH free. Quick reference
  • NSF White Book: the public register of registered products, searchable online only. White Book

Key dates

  • 1 November 2026: eCFR version of 21 CFR 178.3570 used for this page.
  • 2022: current edition of the NSF Registration Guidelines cited on NSF letters up to March 2025.
  • 15 March 1977: source date of 21 CFR 178.3570; no substantive change in the eCFR history since 2016.
  • NSF registration letters carry no expiry date; a registration is current while the product is listed in the White Book.

Frequently asked questions

Where is the NSF registration shown on an SDS?

Suppliers often state it in section 15, for example “NSF H1 registered” with the registration number, or an ISO 21469 claim. Verify it in the White Book before you rely on it.

Does an NSF registered product still need an SDS?

Yes. NSF status does not replace CLP classification or worker safety checks, so keep the SDS of every registered product and use it in your risk assessment.

What does NSF H1 mean?

H1 is the NSF category for lubricants that may have incidental contact with food. H2 is for lubricants with no possible food contact, and HT1 for heat transfer fluids with incidental contact.

Is NSF registration required by law?

No. It is voluntary and not required by EU or US law, but food plants and their auditors widely expect it as proof that a chemical is suitable for a food plant.

How do I verify an NSF registration stated on an SDS?

Look up the product, company or six digit registration number in the NSF White Book. A registration is current while the product is listed there and the NSF mark, category code and number appear on the label.

Does an NSF registration expire when the SDS changes?

NSF registration letters carry no expiry date. A change to the formulation or label needs a new NSF review, so when a revised SDS shows a changed composition, ask the supplier to confirm the registration still applies.

Which substances are allowed in H1 lubricants?

GRAS and prior sanctioned substances, plus the 46 substances listed in 21 CFR 178.3570, each with its own limit.

Is an NSF H1 lubricant also halal or kosher?

Not necessarily. NSF registration says nothing about halal or kosher status, and FDA rules allow fatty acids from animal sources.

  • BRCGS: auditors usually accept NSF codes as proof of food plant suitability.
  • IFS Food: NSF H1 is the usual proof for maintenance materials.
  • FSSC 22000: requires food grade lubricants, usually proven with NSF H1.
  • Halal: a separate approval; NSF says nothing about halal status.
  • Kosher: a separate approval; NSF says nothing about kosher status.
  • United States: US federal chemical rules, including the FDA basis of the categories.

Official sources

Based on research of 16 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under NSF Nonfood Compounds Registration Program rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works