Product registration

Biocidal Products Regulation (BPR)

How to manage the SDS of disinfectants, preservatives and pest control products you buy in the EU: check the authorisation number, the product type and the active substances.

Reviewed 17 November 2026

Quick answer

For every disinfectant, preservative or pest control product you buy in the EU, keep a current safety data sheet and record the authorisation number shown on the label, the product type and the active substances. The SDS follows the normal REACH rules, while the BPR decides whether the product may be sold and used at all. You must use each biocidal product only for the uses and user groups it is authorised for.

What it is

The Biocidal Products Regulation (EU) No 528/2012 controls products that kill, repel or control harmful organisms by chemical or biological means, such as disinfectants, wood preservatives, insecticides, rodenticides, repellents and antifouling paints. The active substance must first be approved at EU level for a product type, and then every product must be authorised before it may be sold or used. Authorisation is national (with mutual recognition in other countries), Union wide, or simplified for low risk products. While older active substances are still under EU review, which should be finished by 31 December 2030, products with them may stay on the market under national rules. Articles treated with biocides, such as antibacterial textiles or treated wood, may only contain approved active substances.

Does it apply to you?

  • You use disinfectants, sanitisers, preservatives, pest control products, repellents or antifouling products at work.
  • You buy products with a biocidal claim, for example “kills 99.9 percent of bacteria”.
  • You sell, import or distribute biocidal products or treated articles in the EU.
  • You work in food and feed areas, drinking water, swimming pools, cooling water or metalworking fluids, where specific product types apply.
  • You buy mixtures with added biocidal preservatives, such as paints or cutting fluids: those are treated articles under the BPR.
  • Medicines, medical devices, cosmetics, food additives and plant protection products are covered by other EU laws.

Managing your safety data sheets

The BPR sets no SDS format of its own. Article 70 refers to REACH Article 31, so the SDS of a biocidal product follows REACH Annex II like any other hazardous product. What the BPR adds is the authorisation that you should be able to show next to each SDS.

Task What applies
Get an SDS for every hazardous biocidal product Required under REACH Article 31, as for any hazardous mixture.
Recognise biocidal products Look at SDS section 1.2 (identified uses), section 3 (active substances) and section 15, and at the label for a biocidal claim and an authorisation number.
Record the authorisation number The label must show the authorisation number (Article 69). Store it with the SDS. In Belgium you will see numbers such as BE-REG-00217 (national registration), BE2023-0001-00-00 (national authorisation) or EU-0025449-0009 (Union authorisation).
Record the product type Note the product type (PT1 to PT22), for example PT2 surface disinfectant or PT18 insecticide, to check the product is used for what it is authorised for.
Check the language and version The SDS and label must be in the language the member state requires. Keep the latest SDS version.
Keep SDS and authorisation current Authorisations last at most 10 years and products under national transitional rules can be withdrawn after an EU decision. Replace or remove products whose authorisation has ended.
Give workers access Make the SDS and the label instructions available to everyone who uses the product, and respect the user category, such as professional use only.
Use them in the risk assessment Use the SDS and the authorised conditions of use (dose, ventilation, re entry time, protective equipment) in your workplace risk assessment.
Keep a chemical register Flag biocidal products in your inventory with product type, authorisation number, active substances and user category.
What an inspector asks to see The authorisation or registration number, proof that the product is used within its authorised uses, and a current SDS and label in the right language.

What you need to do

  1. Identify every biocidal product in your chemical inventory.
  2. Record the product type, authorisation number and active substances for each one.
  3. Check that each authorisation number is valid in your country for the use you make of the product.
  4. Remove or replace products whose authorisation has expired or been cancelled.
  5. Check that professional only products are used only by professionals.
  6. Follow the label instructions on dose, ventilation and re entry times.
  7. Keep a current SDS in the national language for every hazardous biocidal product.
  8. Ask suppliers to confirm that the active substance supplier or product supplier is on the ECHA Article 95 list.
  9. Ask suppliers of treated articles which active substances were used.
  10. Reject products whose labels or advertising use claims such as “non toxic”, “natural” or “environmentally friendly”.

What NextSDS checks for you

Check SDS data used What it tells you
Biocidal product flag Section 1.2, section 3, section 15 Which products in your library are biocidal products
Authorisation number Section 15 and section 1, plus the label Whether a number is recorded for each biocidal product
Active substances Section 3 (CAS, EC, concentration) Which active substances a product contains, matched against EU lists
Product type and use Section 1.2 Whether the product type fits the way you use the product
Preservatives in mixtures Section 3 Which paints, fluids or other mixtures contain biocidal preservatives
Hazard information Section 2 Classification, pictograms and H statements for the risk assessment
SDS version and language Header, section 16 Whether the SDS is current and in the right language

Key lists and limits

  • Union list of approved active substances: the active substances approved per product type, with approval and expiry dates. Published and kept up to date by ECHA. ECHA biocidal active substances
  • Article 95 list: the approved suppliers of each active substance per product type. Since 1 September 2015 a biocidal product may only be sold if its substance supplier or product supplier is on this list. ECHA active substance suppliers
  • Review programme list: the active substance and product type combinations still under EU review, in Annex II to Delegated Regulation (EU) No 1062/2014. Products with these substances may be sold under national rules until a decision. EUR-Lex
  • BPR Annex I: low risk active substances, such as lactic acid, citric acid and lavender oil, that qualify for simplified authorisation. ReachLex Annex I
  • Product types: the 22 product types in four groups (disinfectants, preservatives, pest control, other). ReachLex Annex V
  • Authorised products: all national and Union authorisations are in the ECHA register. ECHA biocidal products

Key dates

  • 31 December 2030: target date to finish the EU review of existing active substances (Delegated Regulation (EU) 2024/1398).
  • 23 November 2026: Regulation (EU) 2026/2382 enters into force and allows member states to grant exemptions in the interests of defence.
  • 19 August 2026: new conditions for carbon dioxide as a low risk active substance (Delegated Regulation (EU) 2026/447).
  • 15 June 2026: Regulation (EU) 2026/1165 extends certain data protection periods to 31 December 2030.
  • 1 September 2015: Article 95 list becomes binding for biocidal products on the market.
  • 1 September 2013: the BPR applies, replacing Directive 98/8/EC.

Frequently asked questions

Does a biocidal product need a safety data sheet?

Yes, when it is classified as hazardous. BPR Article 70 says the SDS of active substances and biocidal products follows REACH Article 31, in the REACH Annex II format.

Where do I find the authorisation number of a biocide?

On the label, which must show the authorisation number given by the national authority or the Commission. Suppliers often repeat it in section 15 of the SDS, so record it with the SDS in your chemical register.

How do I know if a product is a biocidal product?

Look for a biocidal claim or use, such as disinfecting, preserving, repelling or killing pests, in SDS section 1.2 and on the label, together with an authorisation number and active substances with their concentration.

What are the BPR product types?

The BPR has 22 product types in four groups: disinfectants (PT1 to PT5), preservatives (PT6 to PT13), pest control (PT14 to PT20) and other (PT21 antifouling and PT22 embalming fluids).

Can I use a biocidal product for a different purpose?

No. Article 17 says biocidal products must be used in line with the conditions of their authorisation and the label, including the authorised uses and user categories.

What is a treated article?

An article, mixture or substance treated with or containing a biocidal product, such as an antibacterial textile or a paint with a preservative. It may only contain approved active substances, and it needs a label naming the active substances when a biocidal claim is made.

What happens when an authorisation ends?

The authority usually grants a period of grace: up to 180 days to sell existing stock and up to 180 more days to use it. After that the product may no longer be used.

What is the Article 95 list?

An ECHA list of active substances and their approved suppliers per product type. A biocidal product may only be sold if its substance supplier or product supplier is on the list.

  • European Union: EU chemicals baseline with REACH, CLP and the other product laws.
  • Belgium: Belgian biocide registration, label languages and SDS language rules.
  • NSF Nonfood: registration of cleaning and sanitising products for food plants, alongside the BPR authorisation.
  • ISO 45001: occupational health and safety management that uses the SDS and the label in the risk assessment.
  • ISO 14001: environmental management that tracks legal compliance of the chemicals you use.

Official sources

Based on research of 17 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under Biocidal Products Regulation (BPR) rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works