Industry certifications

bluesign

How bluesign affects the SDS you receive and manage in the textile chain: current GHS SDS from suppliers, screening against the BSBL and a mill chemical inventory.

Reviewed 16 November 2026

Quick answer

Under bluesign, a mill manages its chemical inputs from the SDS: you get a current GHS SDS from each chemical supplier with the first delivery and after significant changes, keep a chemical inventory and buy registered chemicals from the bluesign Finder. bluesign itself rates each chemical product blue, grey or black against the BSBL v8.0 limits and GHS criteria, from the full recipe and SDS. Since 1 July 2026 the BSBL v8.0 and BSSL v17.0 apply, and approved chemical products carry the bluepass chemical product mark.

What it is

bluesign checks the chemicals that go into the mill instead of testing finished clothes. Chemical suppliers submit full recipes and SDS, and bluesign rates each chemical product blue (fine), grey (use with care) or black (not allowed) against health, safety and environmental criteria. Products that pass are registered in the bluesign Finder. The BSBL sets maximum concentrations of substances in chemical products, and the BSSL sets consumer safety limits and usage bans for finished articles. Since 2026 the labels are called bluepass: approved chemical products now carry the bluepass chemical product mark, with unchanged criteria.

Does it apply to you?

  • You make or sell dyes, auxiliaries or finishing agents to bluesign System Partner mills.
  • You run a textile, leather or accessory production site that is or wants to be a System Partner.
  • You are a brand that sells bluesign or bluepass products.
  • Belgian and Dutch chemical suppliers are on the System Partner list; no Belgian or Dutch law refers to bluesign, so it applies as a customer requirement.

Managing your safety data sheets

The SDS itself is set by law (REACH article 31 and Annex II in the EU, national language rules and GHS rules elsewhere). bluesign adds these expectations for the SDS you receive and manage.

Task What applies
Collect SDS from suppliers System Partner chemical suppliers must deliver a GHS compliant SDS with the first delivery at the latest, and again after significant changes.
Check against the list Check SDS section 3 against the BSBL v8.0 black limits and BSSL usage bans, section 2 against the GHS rating matrix, and sections 3 and 15 for SVHCs above 1000 mg/kg.
Keep SDS current Suppliers must update the SDS when composition, classification or legislation changes; replace old versions in your library.
Chemical inventory Mills keep a chemical inventory, with input stream management based on the SDS of the chemicals bought, and buy registered chemicals from the bluesign Finder.
What bluesign asks bluesign reviews full recipes, SDS and test data of chemical products, and checks the chemical inventory and input stream records at System Partner sites. An SDS alone is not enough, because it omits components below disclosure limits.

What you need to do

  1. Get a GHS compliant SDS for every chemical product you buy, with the first delivery at the latest and again after significant changes.
  2. Replace old SDS versions when suppliers update them after changes in composition, classifications or legislation.
  3. As a chemical supplier, give every finished product a correct GHS classification and label according to GHS and national rules.
  4. Disclose the full composition of each chemical product, including impurities, for assessment.
  5. Check every component against the BSBL limits for chemical products.
  6. Keep SVHCs not named in the BSBL below 1000 mg/kg.
  7. Make sure no PFAS containing chemicals are used.
  8. Keep a chemical inventory at the mill and buy registered chemicals from the bluesign Finder.
  9. Move B2B labels to the bluepass chemical product mark by the end of 2026 or at the next label run.

What NextSDS checks for you

Check SDS data used What it tells you
BSBL black limits Section 3 (CAS numbers) Which components are banned or restricted in a chemical product
BSSL usage bans Section 3 (CAS numbers) Which chemicals contain substances banned in finished articles
SVHC default limit Sections 3 and 15 Which products contain REACH Candidate List substances
GHS rating Section 2 (H statements) Which hazard statements bluesign rates grey or black
Occupational exposure limits Section 8 Exposure limits for disclosed substances, where the national list is available
SDS currency Revision date of the whole SDS Whether each SDS is up to date

An SDS omits components below disclosure limits, while many BSBL limits are between 1 and 1000 mg/kg, so a full recipe is still needed.

Key lists and limits

  • BSBL v8.0 (bluesign System Black Limits): one limit per substance in the chemical product, in mg/kg or µg/kg, with usage bans and restrictions. SVHCs not listed have a threshold of 1000 mg/kg. Official PDF
  • BSSL v17.0 (bluesign System Substances List): limits in finished articles per usage range A (babies and strong sweating), B (skin contact) and C (no skin contact), with usage bans, limitations and monitoring. Official PDF
  • bluesign RSL v17.0: a subset of the BSSL for brands that test articles. Official PDF
  • GHS rating matrix: blue, grey or black per H statement and exposure. Official PDF
  • Occupational health module: uses the OELs of China (GBZ 2.1), Germany (TRGS 900 and 910) and the USA (OSHA); see United States.
  • Related textile lists: ZDHC MRSL, OEKO-TEX, AFIRM RSL.

Key dates

  • 1 July 2028: latest date for System Partners to implement the revised BSSL sections.
  • 1 July 2027: latest date for revised BSBL sections to take effect.
  • End of 2026: B2B labels of chemical suppliers move to the bluepass mark.
  • 27 September 2026: EU Directive (EU) 2024/825 on green claims applies, the reason for the bluepass rebrand.
  • 1 July 2026: BSSL v17.0, BSBL v8.0 and RSL v17.0 in force.
  • January 2025: articles treated with PFAS containing chemicals removed from the bluesign GUIDE.

Frequently asked questions

When must I receive an SDS from a bluesign System Partner supplier?

At the latest with the delivery, preferably earlier, and again after significant changes. System Partner suppliers must keep the SDS up to date when composition, classification or legislation changes.

Which SDS sections does bluesign use?

Section 3 and the full recipe for the BSBL check, sections 2, 3, 11 and 12 for the GHS rating, section 8 for the occupational health module and sections 9 and 12 for emissions and wastewater.

Is an SDS enough for a bluesign assessment?

No. An SDS omits components below disclosure limits, while many BSBL limits are between 1 and 1000 mg/kg, so bluesign assesses the full recipe.

Does a bluesign mill need a chemical inventory?

Yes. Input stream management at the mill is based on the SDS and specifications of the chemicals bought; mills should keep a chemical inventory and use registered chemicals from the bluesign Finder.

What is the difference between the bluesign BSBL and BSSL?

The BSBL sets maximum concentrations of substances in chemical products. The BSSL sets consumer safety limits and usage bans for substances in finished articles, and the BSBL includes all BSSL substances.

What do blue, grey and black mean in bluesign?

Blue means the chemical product is fine to use, grey means use with care and black means not allowed. bluepass is the new name of the product labels since 2026, with unchanged criteria.

Which bluesign versions apply in 2026?

BSSL v17.0, BSBL v8.0 and the bluesign RSL v17.0, all in force since 1 July 2026. System Partners have until 1 July 2027 for revised BSBL sections and until 1 July 2028 for revised BSSL sections.

Does bluesign allow PFAS?

No. PFAS containing chemicals may not be used, and since January 2025 articles treated with them are removed from the bluesign GUIDE.

  • ZDHC MRSL: industry list for chemicals used in textile and leather production.
  • OEKO-TEX: ECO PASSPORT is another certification for textile chemical products.
  • AFIRM RSL: brand list for finished products; the BSSL jewellery limits reflect it.
  • ChemSec SIN List: NGO list of substances of very high concern, without concentration limits.
  • United States: the OSHA limits used in the bluesign occupational health module.

Official sources

Based on research of 16 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under bluesign rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works