Quick answer
For your safety data sheets, the ZDHC MRSL means a current SDS for every formulation in your chemical inventory and a screening of SDS section 3 against the V4.0 Main List (version date 1 October 2026). The list bans intentional use of its substances in chemical formulations for textile, leather and polymer processing, with formulation limits for impurities per substrate. Because an SDS cannot prove absence at mg/kg level, conformance through the ZDHC Gateway also needs analytical testing.
What it is
The ZDHC MRSL lists substances that must not be used on purpose in the factories that make textiles, leather and footwear materials. Unlike a product restricted substances list, such as the AFIRM RSL, it sets limits on the chemical products the factory buys and uses. A formulation is conformant when listed substances are not intentionally added and any impurity stays below the formulation limit. Brands that sign up to ZDHC ask their suppliers to use only conformant chemicals and to show this through the ZDHC Gateway. The list is not certifiable as a management system, but individual formulations get a conformance level (Level 0 to 3) from ZDHC Approved MRSL Certifiers.
Does it apply to you?
- You make or sell chemical formulations used in textile, leather, rubber, foam or adhesive processing for brands that are ZDHC signatories.
- You run a textile or leather mill or wet processing unit that supplies a ZDHC signatory brand.
- You want your formulations listed on the ZDHC Gateway with a conformance level.
Managing your safety data sheets
The MRSL sets no SDS rule of its own. The SDS you receive is set by law (REACH article 31 and Annex II in the EU, GHS based rules elsewhere); ZDHC signatory brands and certifiers expect the following in practice.
| Task | What applies |
|---|---|
| Collect SDS from suppliers | Get a current SDS for every formulation in your chemical inventory; ask for conformance level and Gateway listing too. |
| Check against the list | Screen SDS section 3 against the V4.0 Main List per substrate, flag EC* and Candidate List substances, and check that Archive List substances are absent. |
| Keep SDS current | Rescreen when the SDS or the MRSL version changes, and keep each result with the list version and date. |
| Chemical inventory | Keep a chemical inventory list of every formulation on site, with supplier, product name and conformance level; the monthly InCheck report is built on it. |
| What the brand or certifier asks | ZDHC certifiers review the SDS (mainly sections 2, 3, 9 and 15) next to analytical testing; brands ask for the inventory and the InCheck report. |
What you need to do
- Keep a chemical inventory of every formulation used on site, with supplier, product name and conformance level.
- Keep a current SDS for every formulation in the inventory.
- Check SDS section 3 of every formulation against the MRSL V4.0 Main List.
- Remove or replace formulations that contain listed substances on purpose.
- Make a phase out plan with deadline and exposure controls for EC* substances such as DMF, DMAC, NMP and NEP.
- Make sure no PFAS is added on purpose; disclose the fluorine source when total fluorine exceeds 50 mg/kg.
- Look for alternatives to substances on the Candidate List.
- Confirm through the SDS that Archive List substances are absent.
- Screen your inventory against the current version (V4.0) and keep the results with the version date.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| MRSL Main List | Section 3 (CAS numbers) | Which formulations contain a substance restricted by the MRSL, per substrate |
| EC* substances | Section 3 (CAS numbers) | Which products need a phase out plan and exposure controls |
| Candidate and Archive List | Section 3 (CAS numbers) | Which substances to substitute and which must be absent |
| Fluorinated substances | Section 3 | Which products may need PFAS evidence or a total fluorine test |
| Hazard classification | Section 2, section 15 | Which products have CMR or sensitiser hazards or REACH entries that often coincide with MRSL substances |
An SDS only lists hazardous components above the legal cut off values, so it cannot prove absence at mg/kg level. Analytical testing by a certifier is still needed for conformance.
Key lists and limits
- MRSL V4.0 Main List: 286 substance entries in 25 groups (for example alkylphenol ethoxylates, chlorophenols, phthalates, PAHs, PFAS, bisphenols, formaldehyde, PCBs), each with a formulation limit per substrate in mg/kg or µg/kg. Official Excel
- EC substances:* EC* stands for Emissions and Exposure Control. These substances, such as the solvents DMAC, DMF, NEP and NMP, are never conformant, but a facility that still uses them needs a phase out plan with a deadline and must control emissions and worker exposure.
- Candidate List: 5 substances expected in a future version. Not tested yet, but substitution is advised.
- Archive List: 9 historic substances that must be absent, checked through the SDS.
- PFAS: intentional use is not conformant; limits are 25 µg/kg per PFAS and 250 µg/kg for the sum. The PFAS substances are those of the AFIRM RSL Appendix B.
- Main changes in V4.0: lower limits for alkylphenol ethoxylates (100 mg/kg), chlorobenzenes and chlorotoluenes (20 mg/kg) and the solvents DMAC, DMF, NEP and NMP (500 mg/kg); new groups for bisphenols, formaldehyde and PCBs. Change log
Key dates
- 1 October 2026: ZDHC MRSL V4.0 version date.
- 1 December 2025: new ZDHC Gateway certifications align with Chemicals to Zero Foundational only, and self declaration options are discontinued.
- 1 June 2024: end of the transition for facilities using up V2.0 stock.
- 1 November 2023: only V3.1 conformant products accepted for upload on the Gateway.
Frequently asked questions
Which SDS sections are checked against the ZDHC MRSL?
Mainly section 3, where the CAS numbers of hazardous components are compared with the Main List. Certifiers also look at section 2 (CMR or sensitiser hazards), section 9 (for example pH or VOC content) and section 15 (REACH Candidate List or restriction entries).
Can a safety data sheet prove MRSL conformance?
No. An SDS only lists hazardous components above legal cut off values, so it cannot show absence at mg/kg level. Certifiers combine SDS review with analytical testing.
What chemical inventory does ZDHC expect?
A chemical inventory list of every formulation used on site, with supplier, product name and conformance level, and a current SDS for each product. The monthly InCheck report from the ZDHC Gateway is built on it.
Do I need to rescreen my SDS when a new MRSL version comes out?
Yes. Brands expect the inventory to be screened against the current version (V4.0), with the result kept together with the list version and date.
What is new in ZDHC MRSL V4.0?
V4.0 lowers the limits for alkylphenol ethoxylates to 100 mg/kg, for chlorobenzenes and chlorotoluenes to 20 mg/kg and for DMAC, DMF, NEP and NMP to 500 mg/kg. It adds groups for bisphenols, formaldehyde and PCBs and aligns the PFAS limits with the French PFAS decree.
What are the ZDHC MRSL conformance levels?
Level 0 is a supplier self declaration. Level 1 adds analytical testing, screening and SDS review by a ZDHC Approved certifier, Level 2 adds an on site assessment of the formulator’s management systems and Level 3 an assessment of its chemical hazard assessment capability.
Is the ZDHC MRSL legally binding?
No. It is a voluntary industry list, required in practice by ZDHC signatory brands. ZDHC states that conformance does not guarantee legal compliance.
How does the ZDHC MRSL treat PFAS?
Intentional PFAS use is not conformant. Limits are 25 µg/kg per PFAS and 250 µg/kg for the sum, and total fluorine above 50 mg/kg means the fluorine source must be disclosed.
Related frameworks
- AFIRM RSL: product restricted substances list for apparel and footwear; its Appendix B is the PFAS list the MRSL refers to.
- OEKO-TEX: ECO PASSPORT certifies textile chemicals and is a recognised route to MRSL conformance.
- bluesign: assessment and registration of textile chemical products with its own black limits.
- ChemSec SIN List: NGO list of substances of very high concern, without concentration limits.
- Cradle to Cradle Certified: accepts the ZDHC MRSL as an alternative for textile chemical formulations under Version 4.1.
Official sources
- ZDHC MRSL official page
- ZDHC MRSL V4.0 (Excel)
- Change log V3.1 to V4.0
- MRSL Update Principles and Procedures V4.0
- ZDHC Gateway update, effective 1 December 2025
- ZDHC Gateway
Based on research of 16 November 2026. This page is not legal advice; always check the official text.