Industry certifications

Cradle to Cradle Certified

What Cradle to Cradle Certified Material Health means for the SDS you collect: screening section 3 against the RSL, supplier declarations and full formulations.

Reviewed 16 November 2026

Quick answer

For Cradle to Cradle Certified, the SDS you collect from suppliers is one form of compliance evidence and a first screen of SDS section 3 against the Restricted Substances List, but it is not enough: the Material Health category of Version 5.0 asks you to know every substance in your product down to 100 ppm, so suppliers usually send full formulations directly to the assessment body. You must also avoid PFAS and halogenated and organophosphate flame retardants, and from Silver level remove CMR, PBT and vPvB substances.

What it is

Cradle to Cradle Certified rates how safe and circular a product is in five categories: Material Health, Product Circularity, Clean Air and Climate Protection, Water and Soil Stewardship, and Social Fairness. The Material Health category asks you to know what the product is made of down to 100 ppm and to comply with a restricted substances list built from EU REACH, POPs, RoHS, toy safety and cosmetics rules. It also bans PFAS and halogenated and organophosphate flame retardants. At higher levels, CMR, PBT and vPvB substances and chemicals that a toxicologist rates “x” (high concern with exposure) must be removed. Suppliers usually send full formulations straight to the assessment body under confidentiality.

Does it apply to you?

  • You want to certify a product to Cradle to Cradle Certified or get a Material Health Certificate.
  • You supply raw materials or chemicals to a manufacturer that certifies its products.
  • Your customers ask for Cradle to Cradle Certified products in building or procurement projects.

Managing your safety data sheets

Cradle to Cradle Certified sets no SDS rule of its own. The SDS you receive is set by law (REACH article 31 and Annex II in the EU); for Material Health it is used as follows.

Task What applies
Collect SDS and composition data from suppliers Collect the SDS of every raw material, plus the Supplier Regulatory Compliance Declaration (an SDS declaring compliance is accepted as an alternative) and, for Silver and above, the CMR and SVHC Declaration. Full formulations usually go from suppliers straight to the assessment body.
Check against the list Check SDS section 3 against the Restricted Substances List and the PFAS, HFR and OPFR lists, section 15 for REACH Annex XIV and XVII statements, and sections 2 and 3 for CMR hazards (Silver).
Keep SDS current Rescreen each July, when the Restricted Substances List is updated, and when a supplier SDS changes.
Chemical inventory Know every homogeneous material at 100 ppm or more of the product and every substance at 100 ppm or more in it. An SDS only shows classified substances above CLP cut offs, so it does not reach this depth.
What the assessor asks The assessment body collects the bill of materials, supplier declarations and full formulations, and rates the chemicals; H statements and CAS numbers from the SDS are input.

What you need to do

  1. Identify every homogeneous material present at 100 ppm or more of the product.
  2. Identify every substance at 100 ppm or more in each material, or lower where a restriction or CLP limit is below 100 ppm.
  3. Check every material against the Restricted Substances List for your version.
  4. Remove PFAS, halogenated flame retardants and listed organophosphate flame retardants.
  5. Ask suppliers to sign the Supplier Regulatory Compliance Declaration, or give an SDS or statement declaring compliance.
  6. For Silver and above, remove CMR, PBT and vPvB substances and ask suppliers for the CMR and SVHC Declaration.
  7. Ask suppliers to send full formulations to the assessment body when the SDS is not enough.
  8. Make a strategy to phase out chemicals rated “x” or grey.
  9. Re screen your products each July when the Restricted Substances List is updated.

What NextSDS checks for you

Check SDS data used What it tells you
Restricted Substances List (Core List) Section 3 (CAS numbers) Which materials contain a substance restricted at Bronze level, with its ppm limit
REACH restrictions and authorisation Section 15 Which products carry REACH Annex XIV or XVII statements
PFAS, halogenated and organophosphate flame retardants Section 3 (CAS numbers) Which products contain substances on the PFAS, HFR or OPFR lists
Packaging restrictions Section 3 (CAS numbers) Which substances are restricted in packaging under Version 5.0
CMR and SVHC (Silver) Sections 2 and 3 (H340, H341, H350, H351, H360, H361; CAS numbers) Which products contain CMR or Candidate List substances
Gaps in composition data Section 3 Which raw materials have only SDS level data and need full disclosure

NextSDS gives H statements and CAS numbers as input, but the Material Health Assessment and exposure rating are done by the assessor.

Key lists and limits

  • Restricted Substances List Version 5.0: Core List of REACH Annex XIV, XVII and POPs entries with a ppm limit per homogeneous material, plus RoHS, toys, cosmetics and a new Packaging RSL based on the EU packaging regulation (EU) 2025/40. It also has PFAS, HFR and OPFR lists. Official Excel
  • Restricted Substances Reference Document Version 4.1: the Bronze restrictions for Version 4.1, with 1,000 ppm limits for fluorine from PFAS, chlorine and bromine from flame retardants and OPFR content. Official Excel
  • CMR definition (Silver): harmonised CLP Annex VI category 1 or 2 CMR substances and the REACH Candidate List.
  • Textile chemistry: the ZDHC MRSL is accepted as an alternative for textile chemical formulations under Version 4.1. See also the EU Ecolabel.

Key dates

  • 30 June 2029: end of validity of the Version 5.0 Restricted Substances List edition of July 2026.
  • 31 December 2027: last date for Version 4.1 certifications, as reported by an assessment body.
  • 1 July 2026: Version 5.0 Restricted Substances List released and effective; updated each July.
  • 16 March 2026: Version 5.0 effective.
  • 10 February 2026: Version 5.0 released.
  • 1 July 2024: Version 4.1 effective.

Frequently asked questions

Is a safety data sheet enough for Cradle to Cradle Certified?

No. The SDS is accepted as one form of regulatory compliance evidence, but it is not enough for the full chemical inventory, so suppliers usually send full formulations to the assessment body.

Can a supplier send an SDS instead of the compliance declaration?

Yes, for the regulatory restrictions. The Version 4.1 Supplier Regulatory Compliance Declaration allows a statement of regulatory compliance or an SDS declaring compliance with the applicable source regulations as alternatives.

How deep must the chemical inventory of my product go?

Every homogeneous material at 100 ppm or more of the product must be reviewed, and every substance at 100 ppm or more in it identified, or lower where a restriction or a harmonised CLP limit is below 100 ppm.

How often should I rescreen my SDS against the Restricted Substances List?

Every July, when the list is updated. The Version 5.0 list was released and became effective on 1 July 2026.

What is required for Silver level?

Among other things, no harmonised CLP category 1 or 2 CMR substances and no Candidate List CMR, PBT, vPvB or equivalent concern substances, unless exposure is unlikely or negligible.

Does Cradle to Cradle Certified allow PFAS?

No. PFAS are restricted from Bronze level, together with halogenated flame retardants and listed organophosphate flame retardants.

What is the current version of Cradle to Cradle Certified?

Version 5.0, released on 10 February 2026 and effective since 16 March 2026. Products certified to earlier versions must move to Version 5.0 under the C2CPII transition policy.

What are the Cradle to Cradle Certified levels?

Products are certified at Bronze, Silver, Gold or Platinum level, in five categories. Material Health can also be certified on its own with a Material Health Certificate.

  • ZDHC MRSL: accepted as an alternative for textile chemical formulations under Version 4.1.
  • EU Ecolabel: official EU ecolabel with its own hazardous substance exclusions.
  • ChemSec SIN List: NGO list of chemicals meeting the SVHC criteria, overlapping with the CMR, PBT and vPvB substances removed from Silver level.

Official sources

Based on research of 16 November 2026. This page is not legal advice; always check the official text.

2,437 SDSs. None left to chase.

Managing safety data sheets under Cradle to Cradle Certified rules? NextSDS tracks down every SDS from your suppliers, processes all 16 sections and checks each one against current regulations.

Get started todaySee how NextSDS works