Quick answer
For your safety data sheets, the GADSL means screening SDS section 3 and section 15 of every paint, adhesive, sealant, lubricant or fluid that ends up in a vehicle for declarable and prohibited substances. The GADSL 2026 is the shared list of substances that automotive suppliers must declare, or must not use, in parts and materials delivered to car makers. Suppliers report the full composition in IMDS and declare every GADSL substance above its threshold, by default 0.1 percent by weight of the homogeneous material, which often needs more data than the SDS gives.
What it is
The GADSL is the shared list of substances that automotive suppliers must report when they deliver parts or materials to car makers. Each substance is marked declarable (D), prohibited in at least one market (P) or both (D/P), with a reason: legally regulated (LR), for assessment (FA) or for information (FI). Suppliers enter the composition of their parts in IMDS, the International Material Data System, where GADSL substances are flagged. Being on the list does not mean a substance is banned: many are only declarable. The list is owned by the Global Automotive Stakeholder Group (GASG): car makers, tier suppliers and chemical industry in the Americas, Europe, Africa and Middle East, and Asia Pacific.
Does it apply to you?
- You supply parts or materials to car makers or to their suppliers.
- You supply paints, adhesives, sealants, lubricants or fluids that remain in the vehicle, such as pre filled washer fluid.
- Process chemicals that do not remain in the vehicle and packaging are out of scope, but many car makers keep their own lists for process chemicals.
Managing your safety data sheets
The GADSL applies to parts and materials and sets no SDS rule of its own. The SDS you receive is set by law (REACH article 31 and Annex II in the EU); in practice it works as follows.
| Task | What applies |
|---|---|
| Collect SDS and composition data from suppliers | Get a current SDS for every mixture that becomes part of a vehicle material. An SDS lists only classified components, so ask your supplier for the full composition needed in IMDS. |
| Check against the list | Check SDS section 3 (CAS numbers and concentrations) for declarable and prohibited GADSL substances and section 15 for REACH entries. |
| Keep SDS current | Recheck when the SDS changes and when the GADSL is updated (1 March and 1 September); declarations must follow a new version within 12 months. |
| Chemical inventory | The GADSL covers what remains in the vehicle. For process chemicals, many car makers keep their own lists, so keep an inventory with an SDS per site. |
| What the car maker asks | IMDS material data sheets with GADSL substances declared above threshold, and no prohibited substances above their limits. |
What you need to do
- Declare the composition of every part and material in IMDS (or a similar system such as CDX).
- Declare every GADSL substance above its reporting threshold, by default 0.1 percent by weight.
- Calculate percentages per homogeneous material, not per part or assembly.
- Declare listed impurities and substances formed during processing when they are above the threshold.
- Make sure prohibited (P) substances do not exceed their limits in any market you supply.
- Use the full GADSL with its guidance, not only the Reference List, when you pass requirements to your suppliers.
- Keep a current SDS for every mixture that becomes part of a vehicle material.
- Update your declarations to a new GADSL version within 12 months of its publication.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| GADSL prohibited substances | Section 3 (CAS numbers) | Which purchased chemicals contain a P or D/P substance |
| GADSL declarable substances | Section 3 (CAS numbers and concentrations) | Which chemicals contain a substance you may have to declare in IMDS |
| REACH entries | Section 15 | Which chemicals contain Candidate List, Annex XIV or Annex XVII substances |
The threshold applies in the final material in the vehicle, not in the mixture as bought. An SDS lists only classified components, so the full composition for IMDS often needs more data from your supplier.
Key lists and limits
- GADSL Reference List 2026 (revised 1 September 2026): about 7,300 entries under 281 GADSL numbers, each with classification, reason code, legal source and reporting threshold. Official Excel
- Default threshold: 0.1 percent by weight unless a lower regulatory limit applies; where a regulation gives no limit, any intentional addition must be declared.
- Legal sources cited in the list: CLP, REACH Candidate List, Annex XIV and Annex XVII, the EU End of Life Vehicles Directive, EU POPs and batteries legislation, and laws in California, Canada and China.
- GADSL Guidance Document: explains the classifications, thresholds and examples. Official PDF
- For electronic components, see also IEC 62474.
Key dates
- 1 September 2026: mid year update of the Reference List.
- 1 March 2026: GADSL 2026 annual update (Guidance Document revised).
- Each year on 1 March: annual update; on 1 September: mid year update for urgent regulatory changes.
Frequently asked questions
Which SDS sections show GADSL substances?
Section 3 (CAS numbers and concentration ranges) and section 15 (REACH Candidate List, Annex XIV and Annex XVII entries) are the starting point to see whether GADSL substances are present in a mixture.
Is an SDS enough for an IMDS declaration?
Often not. An SDS lists only classified components above cut off values, while IMDS needs the full composition. Ask your supplier for the missing data.
Does the 0.1 percent threshold apply to the mixture on the SDS?
No. The threshold applies to the homogeneous material in the vehicle, not to the mixture as bought. A solvent that evaporates from paint is out of scope; a nonylphenol ethoxylate in pre filled washer fluid is in scope.
Does the GADSL cover process chemicals in my chemical inventory?
No. It covers substances that remain in the vehicle at the point of sale. Process chemicals and packaging are out of scope, but many car makers keep their own lists for process chemicals.
What do D, P and D/P mean in the GADSL?
D means declarable: report the substance when it is above the threshold. P means prohibited or limited in at least one market, and D/P means both.
Is the GADSL the same as the IMDS list?
The GADSL is the basis of the IMDS Basic Substance List and of many car maker lists. Suppliers declare their parts in IMDS, where GADSL substances are flagged.
How often is the GADSL updated?
Every year on 1 March, with a mid year update on 1 September for urgent regulatory changes. Declarations must follow a new version within 12 months of publication.
Is the GADSL legally binding?
No. It is voluntary and does not relieve anyone from complying with the law, but car makers require it from their suppliers in practice.
Related frameworks
- IEC 62474: declarable substance list for electrical and electronic components, often used alongside the GADSL.
- RBA: its materials restrictions clause covers customer lists such as the GADSL.
- SMETA: social audit in which buying companies can impose customer lists such as the GADSL.
- ChemSec SIN List: NGO list of substances of very high concern, useful to anticipate future regulated entries.
Official sources
- GADSL website
- GADSL Reference List 2026 (Excel)
- GADSL Guidance Document 2026 (PDF)
- IMDS International Material Data System
Based on research of 16 November 2026. This page is not legal advice; always check the official text.