Quick answer
For your safety data sheets, IEC 62474 means using SDS section 3 and section 15 of the solders, coatings, adhesives, potting compounds and inks you use as one input to declare which regulated substances are in your electronic products. Its Declarable Substance List (DSL), in a free online IEC database, tells suppliers which substances to declare and above which threshold; the standard itself restricts nothing. Its successor IEC 82474-1 adds declarations for process chemicals, which makes the SDS of cleaners, etchants and fluxes relevant too.
What it is
IEC 62474 tells electronics suppliers how to declare which regulated substances are in the products they sell to other manufacturers, and in which format. It does not restrict substances itself. The list of substances to declare, the Declarable Substance List (DSL), lives in a free online database that is updated several times a year, mostly after changes to EU REACH, RoHS, POPs and other laws. Each DSL entry has an ID, a substance or group name, the applications it concerns, a reporting threshold and whether reporting is mandatory or optional. In 2025 IEC and ISO published IEC 82474-1, which builds on IEC 62474 for all sectors and adds declarations for process chemicals.
Does it apply to you?
- You make electrical or electronic products or components and your customers ask for material declarations.
- You supply solders, coatings, adhesives, potting compounds or inks to electronics makers.
- You supply process chemicals such as cleaners, etchants or fluxes: IEC 82474-1 adds declarations for them.
- Other sectors such as rail and heavy equipment also refer to it.
Managing your safety data sheets
IEC 62474 covers articles and sets no SDS rule of its own. The SDS you receive is set by law (REACH article 31 and Annex II in the EU); in practice the standard works as follows.
| Task | What applies |
|---|---|
| Collect SDS and composition data from suppliers | Get a current SDS for every solder, coating, adhesive, potting compound or ink that ends up in your components. An SDS lists only classified components, so it is one input for the declaration, not the full composition. |
| Check against the list | Check SDS section 3 and section 15 against the DSL, using the CAS numbers of the Reference Substances List. |
| Keep SDS current | The DSL is updated several times a year; state the DSL version in each declaration and recheck when it or the SDS changes. |
| Chemical inventory | IEC 82474-1 adds declarations of process chemicals and where they are used, so keep an inventory of process chemicals per site and process with an SDS for each. |
| What the customer asks | An IEC 62474 or IPC-1752A declaration per component or product: at least a statement that no DSL substances are above threshold, or a full declaration. |
What you need to do
- Check which declaration format your customer asks for: IEC 62474 or IPC-1752A.
- Declare every DSL substance present above its reporting threshold in the application named.
- Give at least a simple statement that no declarable substances are above the thresholds, or a full declaration.
- Keep a current SDS for every mixture that ends up in your components.
- Use SDS section 3 and section 15 of those mixtures as one input to know which DSL substances are present.
- Check REACH Candidate List substances above 0.1 percent of the article and RoHS exemptions.
- Keep an inventory of the process chemicals you use and where you use them.
- State the DSL version you used in each declaration.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| Composition of production mixtures | Section 3 | Which hazardous components your solders, coatings, adhesives and inks contain, as input for a declaration |
| REACH Candidate List and restrictions | Sections 3 and 15 (CAS numbers) | Which mixtures contain substances that the DSL is built on |
| Process chemicals inventory | Whole SDS per product and site | Which process chemicals you use, with a current SDS for each |
The DSL itself gives substance names and groups, not CAS numbers. NextSDS is not a declaration tool: the declaration is made in IEC 62474 or IPC-1752 format.
Key lists and limits
- Declarable Substance List (DSL): about 211 entries, most of them mandatory. Thresholds are written per entry, for example “0.1 mass% of article” or “0.01 mass% of total Cd in homogenous material”. IEC 62474 database
- Reference Substances List: CAS numbers for the DSL entries, in the same database.
- Exemption lists: for example the EU RoHS Annex III exemptions.
- IPC-1752A Appendix F: IPC publishes the DSL alongside its North American declaration standard. IPC-1752A appendices
- For vehicle parts, see the GADSL.
Key dates
- 2027: stability date of IEC 62474.
- February 2026: IPC-1752A appendices updated with the DSL.
- May 2025: IEC 82474-1:2025 published, building on IEC 62474.
- 7 December 2020: IEC 62474:2018+AMD1:2020 consolidated version published.
- 30 November 2018: IEC 62474 edition 2 published.
Frequently asked questions
How does an SDS help with an IEC 62474 declaration?
SDS section 3 (composition) and section 15 (regulatory information) of solders, coatings, adhesives, potting compounds and inks show which DSL substances may be in your components. They are one input, because an SDS lists only classified components.
Do I need SDS for process chemicals under IEC 82474-1?
IEC 82474-1 adds declarations of process chemicals such as cleaners, etchants and fluxes and where they are used. A process chemical inventory with a current SDS for each product is the practical basis for that.
Does the DSL give CAS numbers to match against SDS section 3?
The DSL itself gives substance names and groups. CAS numbers are in the separate Reference Substances List in the same database.
Does IEC 62474 ban substances?
No. IEC 62474 only sets how to declare substances and in which format. The restrictions come from laws such as EU RoHS, REACH and the POPs Regulation, on which the DSL is built.
What is the difference between IEC 62474 and IPC-1752A?
Both are material declaration formats for electronics. IPC-1752A is the North American standard, its XML format is aligned with IEC 62474 and IPC publishes the DSL in its Appendix F.
What is IEC 82474-1?
IEC 82474-1:2025 is a horizontal material declaration standard for all sectors, published by IEC and ISO in May 2025. It builds on IEC 62474 and adds declarations for process chemicals.
Related frameworks
- GADSL: the automotive counterpart, used in IMDS for vehicle parts.
- RBA: its materials restrictions clause covers customer lists such as the IEC 62474 declarable substances.
- ChemSec SIN List: NGO list of substances of very high concern, useful to anticipate future regulated entries.
Official sources
- IEC 62474 database
- IEC 62474:2018+AMD1:2020 on the IEC webstore
- IEC 82474-1:2025 on the ISO catalogue
- IPC Materials Declaration Data Exchange Standards
Based on research of 16 November 2026. This page is not legal advice; always check the official text.