Quick answer
As an employer in France, get a current SDS in French from your supplier for every hazardous product and give your workers and the CSE access to it. Use the SDS in your chemical risk assessment, record the result in the single risk assessment document (DUERP), and keep exposure below the binding exposure limits (VLEP) of article R. 4412-149 of the Code du travail.
What it is
France regulates chemicals at national level. Workplace rules on hazardous chemical agents sit in Part Four of the Code du travail (articles R. 4412-1 and following), which transposes the EU Chemical Agents Directive and the CMR Directive. Environmental law, including Seveso and most storage rules, sits in the Code de l’environnement under the regime of classified installations (ICPE). The labour inspectorate checks the workplace rules, the ICPE inspectorate in the regional DREAL checks the environmental rules, and INRS is the national technical body that publishes guidance.
Does it apply to you?
- You employ people in France who use, store or can be exposed to hazardous chemicals, from the first employee.
- You use carcinogenic, mutagenic or reprotoxic substances (CLP category 1A or 1B) or carry out a listed carcinogenic process.
- You employ young workers under 18 or pregnant or breastfeeding workers.
- Your site holds hazardous substances above the ICPE thresholds, for example 50 tonnes of flammable liquids category 2 or 3, or 50 kg of acute toxicity category 1 liquids.
- You sell chemical products in France: the SDS and the label must be in French and hazardous mixtures must be notified to the poison centres.
Managing your safety data sheets
| Task | What applies in France |
|---|---|
| Get an SDS for every hazardous product | The supplier must give you an SDS that follows REACH Annex II (Code du travail R. 4411-73). |
| Check the language | The SDS must be in French (REACH article 31(5)). Documents workers need for their work must also be in French (Code du travail L. 1321-6). |
| Check the version | Keep the latest version. A new SDS with new hazard information is a reason to update the DUERP (R. 4121-2). |
| Give workers access | Workers and the CSE must have access to the SDS provided by the supplier (R. 4412-38). |
| Use the SDS in the risk assessment | The chemical risk assessment must take the supplier information into account (R. 4412-6) and is recorded in the DUERP (R. 4412-10). |
| Write workstation notices | Write a notice de poste for each workstation with exposure to hazardous agents (R. 4412-39). |
| Keep a stock inventory | Authorised ICPE sites keep an up to date inventory of stored materials and hold the SDS before the goods arrive. |
| What an inspector asks | A French SDS for every hazardous product, the DUERP with the chemical risk assessment, exposure measurements and, for CMR agents, the list of exposed workers. |
What you need to do
- Collect a current French SDS for every hazardous product and make it available to workers and the CSE.
- Assess the chemical risks with the SDS and record them in the DUERP; update it at least once a year if you have 11 or more employees.
- Replace hazardous products by less hazardous ones where possible.
- Check every substance against the binding and indicative VLEP lists and keep exposure below them.
- Have exposure measured by an accredited body where a VLEP applies, unless your assessment shows a low risk.
- Write a notice de poste for each workstation exposed to hazardous chemicals.
- Keep an updated list of workers who may be exposed to CMR agents and send it to the occupational health service.
- Check which products young workers and pregnant or breastfeeding workers may not handle.
- Add up stored quantities per ICPE rubrique to find your regime and Seveso status.
- Notify hazardous mixtures and all biocidal products on the ECHA poison centre portal before you sell them.
What NextSDS checks for you
| Check | SDS data used | What it tells you |
|---|---|---|
| SDS language | Whole SDS | Whether the SDS is in French |
| French exposure limits | Section 3 (CAS numbers), section 8 | Which substances have a binding or indicative VLEP and its value |
| CMR agents | Section 2 (hazard classes), section 3 | Which products fall under the CMR regime and the list of exposed workers |
| Young and pregnant workers | Section 2 (hazard statements) | Which products these workers may not handle |
| ICPE and Seveso thresholds | Sections 2, 3 and 9 | Which rubrique each product counts towards and whether totals reach a threshold |
| Storage and incompatibility | Sections 7, 9 and 10 | Flammable liquids, retention needs and products that must be kept apart |
| Version changes | Section 2 | Classification changes that call for a DUERP update |
Key lists and limits
- Binding exposure limits (Code du travail R. 4412-149): about 120 entries that must not be exceeded. If a binding value is exceeded, act at once; for CMR agents, work stops at the posts concerned. Légifrance
- Indicative exposure limits (arrêté du 30 juin 2004, under R. 4412-150): prevention objectives for about 75 further entries. If a value is exceeded, reassess the risk. Légifrance
- How to use them: check the binding list first; where it has no value, or only some reference periods, use the indicative list. Values are 8 hour averages and 15 minute short term values. INRS VLEP database
- Carcinogenic processes (arrêté du 26 octobre 2020): nine substances, mixtures and processes, such as wood dust, respirable crystalline silica and diesel exhaust, that trigger the CMR regime on top of the CLP classification. Légifrance
- ICPE nomenclature (rubriques 4110 to 4630 and 4701 to 4755): quantity thresholds per CLP hazard category and named substance for the declaration, registration and authorisation regimes and the Seveso thresholds. Légifrance
- CLP Annex VI: the harmonised classification decides whether a substance counts as CMR, which is why it is the most useful list to check. ReachLex
Key dates
- 1 January 2029: binding limits for diisocyanates (0.006 and 0.012 mg/m3) replace the indicative ones.
- 31 December 2028: the transitional biological limit for lead in blood (300 µg/L) ends; 150 µg/L applies after it.
- 11 July 2027: the cadmium limit lowers from 0.004 to 0.001 mg/m3.
- 11 July 2026: the beryllium limit lowers from 0.0006 to 0.0002 mg/m3.
- 26 June 2026: updated ICPE nomenclature in force.
- 10 April 2026: décret n° 2026-253 in force, with a binding limit for diesel exhaust (0.05 mg/m3).
- 9 April 2026: lower lead limit (0.03 mg/m3) and indicative diisocyanate limits apply.
- 5 April 2026: lower benzene limit (0.2 ppm) and acrylonitrile limit apply.
- 5 April 2024: employers must keep a list of workers exposed to CMR agents.
Frequently asked questions
Must a safety data sheet be in French in France?
Yes. REACH article 31(5) requires the SDS in the official language of the country where the product is sold, which is French. An SDS only in English from a foreign supplier does not meet this rule.
Must my workers have access to the safety data sheets?
Yes. Article R. 4412-38 of the Code du travail requires that workers and the CSE have access to the SDS provided by the supplier of the chemical agents.
How do I use the SDS in the DUERP?
The chemical risk assessment must take the supplier information, in practice the SDS, into account (R. 4412-6), and its results go into the DUERP (R. 4412-10). Update the DUERP at least once a year in firms with 11 or more employees and when new risk information appears, such as a new SDS version.
Do I need a chemical inventory in France?
Your DUERP must cover every hazardous chemical you use, and for CMR agents you keep a list of exposed workers (R. 4412-93-1). Sites under the ICPE authorisation regime must also keep an up to date inventory of stored materials and hold the SDS before the goods arrive.
Are the French VLEP exposure limits binding?
The values in article R. 4412-149 of the Code du travail are binding and must not be exceeded. The values in the arrêté du 30 juin 2004 are indicative prevention objectives; exceeding one requires a new risk assessment.
What is a notice de poste?
A written notice the employer prepares for each workstation or work situation with exposure to hazardous chemical agents (R. 4412-39). It informs workers of the risks and the measures to protect themselves.
Where are the storage rules for chemicals in France?
Mainly in the ICPE regime of the Code de l’environnement. The quantity of each hazard category on site decides the regime, and national orders set retention, separation of incompatible products and the stock inventory.
Related frameworks
- European Union: REACH, CLP and the EU directives that French law builds on.
- Belgium: neighbouring country with its own binding exposure limit list.
- Wallonia: neighbouring Belgian region, mainly French speaking, with its own environmental permit rules.
- Switzerland: neighbouring country outside the EU with its own chemical rules.
- ISO 45001: its legal register (clause 6.1.3) includes these French workplace rules.
- ISO 14001: its compliance obligations include the ICPE rules.
- ADR: road transport of dangerous goods, applied in France by the arrêté TMD.
- Biocides: EU biocide rules, with a French declaration duty before placing on the market.
- Germany: neighbouring country with its own binding exposure limit list (TRGS 900).
Official sources
- Code du travail, article R. 4412-149, binding VLEP (Légifrance)
- Code du travail, chemical risk articles (Ministry of Labour)
- Arrêté du 30 juin 2004, indicative VLEP (Légifrance)
- Arrêté du 26 octobre 2020, carcinogenic processes (Légifrance)
- ICPE nomenclature, articles R. 511-9 to R. 511-12 (Légifrance)
- INRS exposure limit database
- INRS, declaration of chemical products to poison centres
- REACH article 31 on ReachLex
Based on research of 17 November 2026. This page is not legal advice; always check the official text.